PRODUCT CATALOG

Material Number

Descriptive Comments with Application Recommendations

Friction Code

Normal Friction

Hot Friction

RIGID MOLDED PRODUCTS

D9705

High coefficient molded material for both band and shoe applications.

GH

0.53

0.58

D9723

Extremely stable high coefficient product for on or off-road applications. Is AMECA*** approved

GG

0.52

0.51

D9715

High coefficient product with great stopping capability.

GG

0.52

0.48

D9703

Medium - high coefficient. For use in industrial and off-road applications

GG

0.46

0.46

D9731

Medium level coefficient suitable for demanding off-highway heavy equipment applications.

FF

0.45

0.42

D9702

Medium - high coefficient for industrial and off-road applications. Exhibits excellent fade resistance.

FF

0.44

0.44

D2017

Excellent, general purpose shoe lining. Approved by AMECA*** for on-highway use.

FF

0.42

0.42

D3910

Suitable for light to medium duty applications. Exhibits excellent temperature resistance and is known for its quiet operation.

FF

0.40

0.45

D9706

Less than 3 MOH hardness for soft mating members

FF

0.40

0.44

D2011

Temperature resisting semi-metallic disc brake material for heavy duty stopping requirements

FF

0.41

0.43

D8351*


D8351-oil

Use dry or in oil. High strength composite. Dynamic µ is 0.09 and static µ is 0.15 in oil. Can be used for gear tooth or lug members. Meets requirements of Fed. Spec. HH-L-361G.

FE

0.41

0.33

D9707

Medium coefficient level semi-metallic for use against soft mating surfaces. Product is less than 3 on MOH hardness scale.

EE

0.35

0.33

D3001

Excellent semi-metallic pad material for rapid transit applications.

EE

0.35

0.33

D9704

Medium to low coefficient for those applications requiring a low end friction level.

EE

0.29

0.29

D9709**

Light to medium band brake applications in oil only. Not recommended for dry use. Dynamic µ is .08 and static µ is .16 in oil. Meets Fed. Spec. HH-L-361G.

N/A

N/A

N/A

D9727

Medium-low coefficient material recommended for use against copper and aluminum surfaces.

DD

0.20

0.18

FLEXIBLE MOLDED PRODUCTS

D4080 (D4080-1)

High coefficient material for custom shapes and rigid segments. (D4080-1 is the fully cured version of D4080)

HG

0.58

0.50

D3920 (D3921)

Medium to heavy duty flexible material for drum and band brakes, excavator brakes and clutch linings. (D3921 is the fully cured version of D3920)

GG

0.47

0.50

D9201-5

Medium - high friction level suitable for light to medium duty environments.

FF

0.45

0.42

D9201-0

Medium level coefficient product ideally suited for small diameter shoe applications.

FF

0.43

0.41

D3915 (D3917)

Excellent medium coefficient flexible product for most general purpose applications. For dry use only. (D3917 is the fully cured version of D3915)

FF

0.42

0.45

D3923 (D3924)

For light to medium duty on and off-highway; product is AMECA*** approved. (D3924 is the fully cured version of D3923)

FF

0.41

0.39

D3704

For use in fan clutches or other applications requiring low coefficient material.

DC

0.21

0.12

WOVEN PRODUCTS

D9050*


D9050-oil

Very high friction woven product exhibiting excellent resistance to fade. For use dry or in oil. Dynamic µ is .11 and static µ is .13 if used in oil.

GG

0.51

0.56

DZAAF2

High coefficient product for industrial drum, band brakes, marine mooring and towing winches.

GF

0.54

0.48

D9010-1*


D9010-oil

Medium to high coefficient woven product. Medium to heavy duty service such as winch, crane and hoist applications.. Use dry or in oil. Dynamic µ is .10, static µ is .18 in oil.

GF

0.46

0.45

D9098

Medium coefficient product for use in light to medium duty band brakes or cone clutches.

FF

0.44

0.36

SPECIALTY PRODUCTS

D6150

High strength composite for use dry or in oil (gear tooth, lugs, etc.)
 

0.36

0.43

* Can be used dry or in oil. ** Can be used in oil only. ***American Manufacturers Equipment Compliance Agency, Inc.